GLIDER
GLIDER Alpes Lasers introduces the GLIDER widelytunable mid-IR light source. Based ona external cavity design, the Glider is amonolithic all-in-one light source that requiresno assembly or external drivers. The opticaloutput is a single-beam of light whosewavelength can be selected within a range ofup to ~850 cm –1 . Alpes Laser’s GLIDER is designed for […]
Laser Pointer
Laser Pointer The Laser Pointer is a cutting-edge, all-in-one solution designed to meet your alignment operation needs. Equipped with either a Quantum Cascade Laser (QCL) or Interband Cascade Laser (ICL), this integrated system combines a ruggedized opto-mechanic system, driver, and temperature controller for optimal efficiency and precision. Key Features: Visible and Mid-IR co-linear beams […]
Beam Combiner
Beam Combiner The Alpes Lasers Beam Combiner is a platform that allows the output beam of two different quantum cascade lasers in standard HHL housing to be combined into a single beam. The system uses fixed optics to rotate the polarization of one of the beam and combines them using a polarizing plate, resulting in […]
S-4 CW Driver
S-4 CW Driver High Compliance CW Driver for Quantum Cascade Lasers The S-4 High Compliance CW driver is compatible with QCL or ICL lasers from Alpes Lasers and is available either as a standalone driver or within a Kit combined the TC-3 Temperature controller, lasers and cables to constitue a complete light emitting source. The […]
TC-3 Temperature Controller
TC-3 Temperature ControllerTC-3 Alpes can provide the TC-3, a temperature controller pre-set for usage with a LLH or HHL housing but which is also a versatile unit which can be programmed by the user for use with a variety of NTC and RTD sensor, and can power a Peltier cooler with up to 5.0A of […]
HHL Heatsink plate
HHL Heatsink plateHHL Heatsink The HHL Heatsink is a water-cooling circuit that can be used to mount the HHL and ensures it operates with ideal thermal performances. While the HHL can be mounted on third-party or proprietary heatsinks (including passive heatsinks) the performances are only guaranteed if the heatsink allows keeping the backplate at +20°C with a 0.1°C/W […]
S-2 QCL Pulser
S-2 QCL Pulser Warning! A recently discovered bug in the S-2m pulser may trigger unwanted behaviour if the pulser is quickly rebooted after a power failure. In order to operate the system safely, you should always wait at least 30 seconds after a power failure or shutdown before you start the pulser again. An updated […]
Quantum Cascade Laser Starter Kit for CW lasers
Quantum Cascade Laser Starter Kit for CW lasersSK for CW lasers The CW version of the Starter Kit comprises a TC-3 temperature controller as well as the necessary cables to connect a housing (LLH or HHL) to a S-4 CW laser driver (not included). It comprises the following elements: TC-3 Temperature Controller Cable to connect […]
Quantum Cascade Laser Starter Kit for pulsed lasers
Quantum Cascade Laser Starter Kit for pulsed lasersSK for pulsed lasers The QCL Starter Kit contains all the necessary accessories to operate pulsed QCL. It comprises the following elements: S-2 Pulser TC-3 Temperature Controller Cables to connect accessories to HHL or LLH housing It is often purchased with the following optional elements: Laser Laboratory Housing, or […]
Laser safety Goggles
Laser safety Goggles Alpes Lasers products are components that may be integrated into a full system. Alpes recommends that the users should be familiar with their local rules and regulations as they are responsible for laser safety. Results may vary depending on the electronics and optics used with the laser chip. The guidelines below are […]
